ARTICLE
Volume 8,Issue 8
6 June 2025
Research on the Accuracy of Robot End Position Based on Joint Motion Error
Hualin Zheng ,
Yang Liu ,
Yangqiu Xia ,
Xiaobing Hu
Show Less
1
School of Mechanical and Electrical Engineering, Southwest Petroleum University, Chengdu 610500, China,
2
National Machine Tool Production Quality Supervision Testing Center, Chengdu 610200, China,
3
School of Mechanical Engineering, Sichuan University, Chengdu 610065, China,
ssr 2025 , 7(5), 276–285;
https://doi.org/10.26689/ssr.v7i5.10744
Abstract
In robotic intelligent manufacturing engineering, the machining accuracy of workpieces is directly related to the end positioning accuracy of six-degree-of-freedom serial robots, so compensating for the latter is of great significance. This article proposes a method to improve the absolute positioning accuracy of a robot by correcting the joint angles of the robot without changing the parameters of the robot controller. Firstly, establish a forward kinematics model of the robot based on the spiral theory. Then, the motion errors of each joint of the robot are measured using a laser tracker, and the RBF neural network is trained to predict the motion errors of each joint of the robot. Finally, the predicted joint motion errors are compensated for the theoretical joint angles, thereby improving the accuracy of robot end positioning. The experimental results show that the precision of the robot’s end position has been improved from 0.2456 mm to 0.0716 mm, verifying the effectiveness of this method.
References
Yang P, Guo ZG, Kong YB, 2020, Plane Kinematic Calibration Method for Industrial Robot Based on Dynamic Measurement of Double Ball Bar. Precision Engineering, 2020(62): 265–272.
Lv ZY, Wen XL, Cui WX, et al., 2021, Research on Pose Point Set Optimization for Kinematic Parameter Calibration of Industrial Robots. Instrument Technique and Sensor, 2021(7): 97–102 + 121.
Liu W, Liu S, Deng Z, et al., 2023, Research Progress on Positioning Error Compensation Technology of Industrial Robot. Journal of Mechanical Engineering, 59(17): 1–16.
Xue L, Yang YK, Li DS, et al., 2024, Identification and Online Compensation Method of Robot End Load Gravity Based on Laser Tracker. Aviation Manufacturing Technology, 67(5): 53–59.
Jiao JC, Tian W, Zhang L, 2022, Hierarchical Compensation Technology for Machining Error of Industrial Robots. Computer Integrated Manufacturing System, 28(6): 1627–1637.
Ding C, Zhao RH, Li L, et al., 2020, Research on the Accuracy of Robot End Position Based on Joint Angle Deviation. Micro Nano Electronics and Intelligent Manufacturing, 2020(3): 30–35.
Filion A, Wang XL, Liu ZHF, et al., 2019, New Method for Robot Tool and Camera Pose Calibration. Chinese Journal of Scientific Instrument, 40(1): 101–108.
Pu ZW, Cao BS, Xie ZW, et al., 2023, Kinematic Calibration of a Space Manipulator Based on Visual Measurement System with Extended Kalman Filter. Machines, 2023(11): 409.
Mi X, Ku XC, Ma DY, et al., 2022, Singularity Analysis of 6R Articulated Robot. Journal of Mechanical & Electrical Engineering, 39(11): 1620–1626.
Zhu QD, Xie XR, Li C, et al., 2019, Kinematic Self-calibration Method for Dual-Manipulators Based on Optical Axis Constraint. IEEE Access, 2019(7): 7768–7782.
Liu Y, Zhuang ZH, Li YW, 2022, Closed-Loop Kinematic Calibration of Robots Using a Six-Point Measuring Device. IEEE Transactions on Instrumentation and Measurement, 2022(71): 1–12.
Judd RP, Knasinski AB, 1990, A Technique to Calibrate Industrial Robots with Experimental Verification. IEEE Transactions on Robotics and Automation, 6(1): 20–30.
Zhang L, Tian W, Zheng FW, 2020, Accuracy Compensation Technology of Closed-Loop Feedback of Industrial Robot Joints. Transactions of Nanjing University of Aeronautics and Astronautics, 37(6): 858–871
Zhang YJ, Cui J, Li Y, et al., 2023, Modeling and Calibration of High-order Joint-dependent Kinematic Errors of Serial Robot Based on Local POE. Industrial Robot-The International Journal of Robotics Research and Application, 50(5): 753–764.
Gao WB, Luo RQ, Jian, ZZ, 2021, Kinematic-Parameter Calibration for Modular Robots Based on the Local POE. Jiqiren/Robot, 43(1): 66–73.
Pardos-Gotor J, 2021, Screw Theory in Robotics: An Illustrated and Practicable Introduction to Modern Mechanics. CRC Press, Florida.
Zhang B, Wei ZZ, Zhang GJ, 2010, Fast Conversion Method Between Robot Coordinate System and Laser Tracker Coordinate System. Journal of Instrumentation and Instrumentation, 2010(9): 1986–1990.
Liu YC, Xiong YH, Yang HX, 2022, Fixed-time Sliding Mode Control of Multi-joint Robot Based on RBF Neural Network. Control and Decision, 37(11): 2790–2798.
Che YX, Yang XG, Gao F, 2017, Research on Kinematic Calibration Method of Three Degree of Freedom Serial Robot Arm Based on Ball Rod Instrument. Mechanical Strength, 39(6): 1315–1319.
Share
Back to top
Bio-Byword Scientific Publishing Pty. Ltd.
We are committed to supporting the scientific community by publishing impactful research and fostering effective communication among scientists. We continuously seek ways to accelerate scientific progress while upholding transparency and open dialogue. Our goal is to make knowledge freely and barrier‑free accessible to all.
Contact us: info@bbwpublisher.com
Level 10, 50 Clarence Street Sydney, NSW 2000 Australia